« Ipv6 cheatsheet » : différence entre les versions
Aller à la navigation
Aller à la recherche
(Page créée avec « RA flags : * M Managed Address Configuration flag. If set indicates host should use stateful configuration (e.g. DHCPv6) for address data. * O Other Configuration flag.... ») |
Aucun résumé des modifications |
||
| (Une version intermédiaire par le même utilisateur non affichée) | |||
| Ligne 1 : | Ligne 1 : | ||
[[category:networking]] | |||
RA flags : | RA flags : | ||
* M Managed Address Configuration flag. If set indicates host should use stateful configuration (e.g. DHCPv6) for address data. | * M Managed Address Configuration flag. If set indicates host should use stateful configuration (e.g. DHCPv6) for address data. | ||
| Ligne 9 : | Ligne 11 : | ||
* Managed: Client addresses assigned only via DHCPv6. | * Managed: Client addresses assigned only via DHCPv6. | ||
* Assisted: Client addresses assigned by either DHCPv6 or SLAAC (or both). | * Assisted: Client addresses assigned by either DHCPv6 or SLAAC (or both). | ||
Show RA : <code>tcpdump -v -n -i ens18 icmp6 and ip6[40] == 134</code> | |||
Dernière version du 8 janvier 2023 à 22:14
RA flags :
- M Managed Address Configuration flag. If set indicates host should use stateful configuration (e.g. DHCPv6) for address data.
- O Other Configuration flag. Indicates "other" information (such as DNS server addresses) is available using stateful configuration (e.g. DHCPv6).
- A autonomous address-configuration flag. When set indicates that this prefix can be used for stateless autoconfiguration.
pfsense RA configuration :
- Router Only: Clients will need to set addresses statically
- Unmanaged: Client addresses obtained only via Stateless Address Autoconfiguration (SLAAC).
- Managed: Client addresses assigned only via DHCPv6.
- Assisted: Client addresses assigned by either DHCPv6 or SLAAC (or both).
Show RA : tcpdump -v -n -i ens18 icmp6 and ip6[40] == 134