« Smokeping master et slave » : différence entre les versions

* binary = /usr/bin/fping

Défini le binaire à utiliser. fping6 ou fping.

* blazemode = true

Dans ce mode, 1 paquet supplémentaire est envoyé par rapport à la valeur <code>pings</code> (définie dans <code>/etc/smokeping/config.d/Database</code>), et le premier paquet envoyé est ignoré (ce premier paquet a souvent un RTT plus long et non significatif).

* hostinterval

The fping "-p" parameter, but in (possibly fractional) seconds rather than milliseconds

This parameter sets the time that fping waits between successive packets to an individual target.

default : 1s (1000ms, fping default)

* mininterval

The fping "-i" parameter, but in (probably fractional) seconds rather than milliseconds

The minimum amount of time between sending a ping packet to any target.

default : 0.01s (10ms)

* timeout

The fping "-t" parameter, but in (possibly fractional) seconds rather than milliseconds

default : 0.5s (500ms, fping default) (no effect due to fping being in counting (-C) mode)